Indexing scheme relating to G06F3/041 - G06F3/045

Full Title

Indexing scheme relating to G06F3/00 - G06F3/048 > Indexing scheme relating to G06F3/041 - G06F3/045

Child Classifications

Navigate with arrow keys, Enter to open

• G06F 2203/04101 2.5D-digitiser, i.e. digitiser detecting the X/Y position of the input means, finger or stylus, also when it does not touch, but is proximate to the digitiser's interaction surface and also measures the distance of the input means within a short range in the Z direction, possibly with a separate measurement setup
• G06F 2203/04102 Flexible digitiser, i.e. constructional details for allowing the whole digitising part of a device to be flexed or rolled like a sheet of paper
• G06F 2203/04103 Manufacturing, i.e. details related to manufacturing processes specially suited for touch sensitive devices
• G06F 2203/04104 Multi-touch detection in digitiser, i.e. details about the simultaneous detection of a plurality of touching locations, e.g. multiple fingers or pen and finger
• G06F 2203/04105 Pressure sensors for measuring the pressure or force exerted on the touch surface without providing the touch position
• G06F 2203/04106 Multi-sensing digitiser, i.e. digitiser using at least two different sensing technologies simultaneously or alternatively, e.g. for detecting pen and finger, for saving power or for improving position detection
• G06F 2203/04107 Shielding in digitiser, i.e. guard or shielding arrangements, mostly for capacitive touchscreens, e.g. driven shields, driven grounds
• G06F 2203/04108 Touchless 2D- digitiser, i.e. digitiser detecting the X/Y position of the input means, finger or stylus, also when it does not touch, but is proximate to the digitiser's interaction surface without distance measurement in the Z direction
• G06F 2203/04109 FTIR in optical digitiser, i.e. touch detection by frustrating the total internal reflection within an optical waveguide due to changes of optical properties or deformation at the touch location
• G06F 2203/04111 Cross over in capacitive digitiser, i.e. details of structures for connecting electrodes of the sensing pattern where the connections cross each other, e.g. bridge structures comprising an insulating layer, or vias through substrate
• G06F 2203/04112 Electrode mesh in capacitive digitiser: electrode for touch sensing is formed of a mesh of very fine, normally metallic, interconnected lines that are almost invisible to see. This provides a quite large but transparent electrode surface, without need for ITO or similar transparent conductive material
• G06F 2203/04113 Peripheral electrode pattern in resistive digitisers, i.e. electrodes at the periphery of the resistive sheet are shaped in patterns enhancing linearity of induced field
• G06F 2203/04114 Touch screens adapted for alternating or simultaneous interaction with active pens and passive pointing devices like fingers or passive pens